Intelligent Operation ST-60 Moisture Analyzer with Halogen Heating
for Accurate Halogen moisture meter
ST-60Moisture Analyzer with halogen heating, intelligent operation.
Quickly drying the sample evenly to obtain accurate moisture
determination results of ground water clear determination to
achieve visual information display, simple, easy to operate
instrument. Water samples stored in a variety of pre-determination,
makes testing quick and easy. And improved several times compared
to mechanical efficiency and accuracy of measurements. Standard
interface with computers and other peripherals connected.
characteristic
1. It can be used after unpacking without installation and
commissioning;
2. No training is required, the operation is simple, and cumbersome
use steps are saved;
3. Short measuring time and high working efficiency;
4. Uniform heating, stable performance and accurate testing;
5. Small size and light weight;
6. Full-automatic measurement, alarm reminder after measurement, no
need to watch the measurement process;
7. It is widely used and almost suitable for moisture determination
in all industries;
8. The sensor imported from Germany makes the instrument test more
excellent and accurate;
9. The unique windshield design makes the instrument weighing
system more stable;
10. The water content and solid content of the sample can be
converted at the same time;
11. The heating chamber adopts pure stainless steel chamber cover,
which is high temperature resistant and easy to clean.
working principle:
The traditional moisture determination method is generally oven
drying method. The test of a sample takes two or three or even
three or four hours, and the moisture value (moisture content) of
the sample can be obtained only after weighing and manual
calculation by a balance. The low efficiency of moisture
determination by oven method can not meet the needs of high-tempo
enterprise production. ST series rapid moisture tester is a
high-efficiency moisture tester developed. It uses a
high-efficiency drying heater - high-quality annular halogen lamp
to heat the sample quickly and evenly, and the moisture of the
sample is continuously dried. During the whole measurement process,
the instrument automatically displays the measurement results in
real time: sample weight, water content, solid content, measurement
time, heating temperature, etc.
Technicl parameters
| Model | ST-60 | ST-80 | ST-100 |
| Maximum weighing (g) | 110 | 110 | 110 |
| Reading accuracy (g) | 0.005 | 0.001 | 0.0001 |
| Moisture measurement error | 0.2% | 0.1% | 0.05% |
| Service temperature | 5°C---35°C |
| Display | LCD |
| Calibration method | External calibration |
| Pan size(mm) | Φ90 |
| Dimensions(W*L*H) | 200*180*380 |
| Weight(Kg) | 5.8 |
| Heating mode | Halogen lamp |
| Temperature sensor | PT-100 |
| temperature range | 40°C---199°C |
| Temperature interva | 1°C |
| Moisture range | 0.00%---100% |
| Moisture readability | 0.01% |
| Dry residual range | 100.00%---0.00% |
| Dry residual readability | 0.01% |
| ATRO | 100%---999% |
| ATRO | 0%---999% |
| Temperature setting | 40°C---199°Cby1°Cstep |
| Time setting | 1---99min by 1s step |
| Automatic stop | 0.1%---9.9%within 1 min |
| Save History | 15 |
| Heating part | 220V+15%50Hz 400W |
| Balance part | External power supply
Output: 9V Lnput: 220V+15%50Hz |
packing list
| S/N | Name | Quantity | Unit | Remarks |
| 1 | Host | 1 | set | |
| 2 | Sample tray | 5 | piece | |
| 3 | Power cord | 1 | piece | |
| 4 | Fuse tube | 1 | piece | 10A in the safety seat |
| 5 | instruction manual | 1 | copy | |
| 6 | Certificate warranty card | 1 | COPY | |
